Operation to compute 2D mesh on 3D. More...

#include <SMESHGUI_Make2DFrom3DOp.h>

Inheritance diagram for SMESHGUI_Make2DFrom3DOp:

Public Types
typedef QList< int >	IdList

Public Member Functions
	SMESHGUI_Make2DFrom3DOp ()

virtual	~SMESHGUI_Make2DFrom3DOp ()

virtual LightApp_Dialog *	dlg () const

Static Public Member Functions
static void	extractIds (const QStringList &, IdList &, const QChar)

Protected Types
enum	EntityType { Object, MeshNode, MeshElement }

Protected Slots
virtual bool	onApply ()

void	onModeChanged ()
	Set filter corresponding to dimension. More...

virtual void	onActivateObject (int)
	Installs filter corresponding to certain object selection widget. More...

virtual void	onDeactivateObject (int)
	Removes filter corresponding to certain object selection widget. More...

virtual void	onSelectionChanged (int)
	Empty default implementation. More...

virtual void	onTextChanged (int, const QStringList &)
	Default implementation allowing user to edit selected ids "by hands". More...

virtual void	onOk ()

virtual void	onCancel ()

void	onHelp ()

Protected Member Functions
virtual void	startOperation ()
	This enumeration is used in typeById method to distinguish objects, mesh nodes and mesh elements, because node end element ids may overlap. More...

virtual void	selectionDone ()

virtual SUIT_SelectionFilter *	createFilter (const int) const
	Creates filter being used when certain object selection widget is active If no filter must be used, then function must return 0 if id is negative, then function must return filter for common using independently of active widget. More...

bool	isValid (QString &) const

void	extractIds (const QStringList &, IdList &) const
	Find in QStringList correct node or element ids representation and append integer(id) to IdList. More...

virtual void	commitOperation ()

virtual void	abortOperation ()

virtual void	initDialog ()
	sets the dialog widgets to state just after operation start More...

void	removeCustomFilters ()
	Remove only filters set by this operation (they are in map myFilters ) More...

Selection_Mode	selectionMode () const
	Return what selection mode is set in VTK viewer. More...

void	setSelectionMode (const Selection_Mode)
	Set selection mode in VTK viewer. More...

void	highlight (const Handle(SALOME_InteractiveObject)&, const bool, const bool=true)
	Hilight object in VTK viewer. More...

void	addOrRemoveIndex (const Handle(SALOME_InteractiveObject)&, const TColStd_MapOfInteger &, const bool isModeShift)
	Select some nodes or elements in VTK. More...

SVTK_ViewWindow *	viewWindow () const

SVTK_Selector *	selector () const

virtual void	selected (QStringList &, SMESHGUI_Dialog::TypesList &, QStringList &) const
	Get names, types and ids of selected objects. More...

virtual int	typeById (const QString &, const EntityType) const
	Find type by id. More...

virtual QChar	idChar () const
	Char using to divide <entry> and <id> in string id representation. By default, '#'. More...

void	selectedIds (const int, IdList &) const
	Try to find in certain object selection widget selected node or element ids and return it. More...

SMESH::SMESH_Mesh_var	mesh () const
	Return selected mesh if selection mode isn't ActorSelection and only one object is selected. More...

SMESH_Actor *	actor () const
	Return actor according to selected mesh if selection mode isn't ActorSelection. More...

virtual bool	isReadyToStart () const

virtual void	setIsApplyAndClose (const bool theFlag)

virtual bool	isApplyAndClose () const

virtual void	setDialogActive (const bool)
	Set according dialog active or inactive. More...

SMESHGUI *	getSMESHGUI () const

bool	isStudyLocked (const bool=true) const
	Verifies whether study of operation is locked. More...

	_PTR (Study) studyDS() const

virtual bool	isValid (SUIT_Operation *) const
	Verifies whether given operator is valid for this one. More...

Protected Attributes
QString	myHelpFileName

bool	myIsApplyAndClose

Private Member Functions
bool	compute2DMesh (QStringList &)

Private Attributes
SMESH::SMESH_Mesh_var	mySrcMesh

QPointer < SMESHGUI_Make2DFrom3DDlg >	myDlg

SMESH_TypeFilter	myMeshFilter

SMESH_TypeFilter	myGroupFilter

Detailed Description

Operation to compute 2D mesh on 3D.

Copy Mesh operation class.

Member Typedef Documentation

typedef QList<int> SMESHGUI_SelectionOp::IdList

inherited

Member Enumeration Documentation

enum SMESHGUI_SelectionOp::EntityType

protectedinherited

Enumerator
Object
MeshNode
MeshElement

Constructor & Destructor Documentation

SMESHGUI_Make2DFrom3DOp::SMESHGUI_Make2DFrom3DOp ( )

SMESHGUI_Make2DFrom3DOp::~SMESHGUI_Make2DFrom3DOp ( )

virtual

References myDlg.

Member Function Documentation

SMESHGUI_Operation::_PTR ( Study ) const

protectedinherited

void SMESHGUI_SelectionOp::abortOperation ( )

protectedvirtualinherited

References SMESHGUI_SelectionOp::myOldSelectionMode, SMESHGUI_SelectionOp::removeCustomFilters(), and SMESHGUI_SelectionOp::setSelectionMode().

SMESH_Actor * SMESHGUI_SelectionOp::actor ( ) const

protectedinherited

Return actor according to selected mesh if selection mode isn't ActorSelection.

References SMESH::FindActorByObject(), and SMESHGUI_SelectionOp::mesh().

Referenced by SMESHGUI_RevolutionDlg::ClickOnApply(), compute2DMesh(), SMESHGUI_ShapeByMeshOp::onElemIdChanged(), and SMESHGUI_SelectionOp::onTextChanged().

void SMESHGUI_SelectionOp::addOrRemoveIndex	(	const Handle(SALOME_InteractiveObject)&	obj,
		const TColStd_MapOfInteger &	indices,
		const bool	isModeShift
	)

protectedinherited

Select some nodes or elements in VTK.

References SMESHGUI_SelectionOp::selector().

Referenced by SMESHGUI_FindElemByPointOp::onElemSelected(), and SMESHGUI_ReorientFacesOp::onTextChange().

void SMESHGUI_SelectionOp::commitOperation ( )

protectedvirtualinherited

Reimplemented in SMESHGUI_ShapeByMeshOp, and SMESHGUI_MeshOp.

References SMESHGUI_SelectionOp::myOldSelectionMode, SMESHGUI_SelectionOp::removeCustomFilters(), and SMESHGUI_SelectionOp::setSelectionMode().

Referenced by SMESHGUI_MeshOp::commitOperation(), and SMESHGUI_ShapeByMeshOp::commitOperation().

bool SMESHGUI_Make2DFrom3DOp::compute2DMesh ( QStringList & theEntryList )

private

References SMESHGUI_Operation::_PTR(), SMESHGUI::activeStudy(), SMESHGUI_SelectionOp::actor(), SMESH::BND_2DFROM3D, dlg(), SMESH::FACE, SMESH::FindActorByEntry(), SMESHGUI_Make2DFrom3DDlg::MeshOrGroups, myDlg, mySrcMesh, SMESH::RepaintCurrentView(), SObject(), SMESH::Update(), and SMESH::VOLUME.

Referenced by onApply().

SUIT_SelectionFilter * SMESHGUI_Make2DFrom3DOp::createFilter ( const int ) const

protectedvirtual

Creates filter being used when certain object selection widget is active If no filter must be used, then function must return 0 if id is negative, then function must return filter for common using independently of active widget.

Reimplemented from SMESHGUI_SelectionOp.

References SMESH_LogicalFilter::LO_OR, me, myGroupFilter, and myMeshFilter.

LightApp_Dialog * SMESHGUI_Make2DFrom3DOp::dlg ( ) const

virtual

References myDlg.

Referenced by compute2DMesh(), isValid(), onApply(), and selectionDone().

void SMESHGUI_SelectionOp::extractIds	(	const QStringList &	ids,
		IdList &	list,
		const QChar	idchar
	)

staticinherited

Referenced by SMESHGUI_SelectionOp::extractIds(), SMESHGUI_SelectionOp::onTextChanged(), and SMESHGUI_SelectionOp::selectedIds().

void SMESHGUI_SelectionOp::extractIds	(	const QStringList &	ids,
		IdList &	list
	)		const

protectedinherited

Find in QStringList correct node or element ids representation and append integer(id) to IdList.

References SMESHGUI_SelectionOp::extractIds(), and SMESHGUI_SelectionOp::idChar().

SMESHGUI * SMESHGUI_Operation::getSMESHGUI ( ) const

protectedinherited

Referenced by SMESHGUI_BaseComputeOp::computeMesh(), SMESHGUI_BaseComputeOp::evaluateMesh(), SMESHGUI_Operation::isReadyToStart(), SMESHGUI_MeshOp::onGeomSelectionByMesh(), SMESHGUI_BaseComputeOp::onGroupOfBadMesh(), SMESHGUI_Operation::onHelp(), SMESHGUI_PrecomputeOp::onPreview(), SMESHGUI_BaseComputeOp::onPublishShape(), SMESHGUI_Add0DElemsOnAllNodesOp::onSetFilter(), SMESHGUI_BaseComputeOp::onShowBadMesh(), SMESHGUI_FindElemByPointOp::startOperation(), SMESHGUI_MakeNodeAtPointOp::startOperation(), and SMESHGUI_SelectionOp::viewWindow().

void SMESHGUI_SelectionOp::highlight	(	const Handle(SALOME_InteractiveObject)&	obj,
		const bool	hilight,
		const bool	immediately = `true`
	)

protectedinherited

Hilight object in VTK viewer.

References SMESHGUI_SelectionOp::viewWindow().

Referenced by SMESHGUI_ReorientFacesOp::onTextChange(), and SMESHGUI_SelectionOp::onTextChanged().

QChar SMESHGUI_SelectionOp::idChar ( ) const

protectedvirtualinherited

Char using to divide <entry> and <id> in string id representation. By default, '#'.

Referenced by SMESHGUI_SelectionOp::extractIds(), SMESHGUI_SelectionOp::selected(), and SMESHGUI_SelectionOp::typeById().

void SMESHGUI_SelectionOp::initDialog ( )

protectedvirtualinherited

sets the dialog widgets to state just after operation start

Reimplemented from SMESHGUI_Operation.

bool SMESHGUI_Operation::isApplyAndClose ( ) const

protectedvirtualinherited

References SMESHGUI_Operation::myIsApplyAndClose.

Referenced by SMESHGUI_GroupOnShapeOp::onApply(), SMESHGUI_MeshOp::onApply(), and onApply().

bool SMESHGUI_Operation::isReadyToStart ( ) const

protectedvirtualinherited

References SMESHGUI_Operation::getSMESHGUI(), and SMESHGUI_Operation::isStudyLocked().

bool SMESHGUI_Operation::isStudyLocked ( const bool theMess = true ) const

protectedinherited

Verifies whether study of operation is locked.

Parameters

theMess - specifies whether message box must be shown if study is locked

Returns: State of study.

Verifies whether study of operation is locked. If second parameter is TRUE and study is locked when corresponding message box appears

References SMESHGUI::desktop(), and studyDS().

Referenced by SMESHGUI_Operation::isReadyToStart(), SMESHGUI_GroupOnShapeOp::onApply(), SMESHGUI_ReorientFacesOp::onApply(), SMESHGUI_MakeNodeAtPointOp::onApply(), SMESHGUI_MeshOp::onApply(), and onApply().

bool SMESHGUI_Operation::isValid ( SUIT_Operation * theOtherOp ) const

protectedvirtualinherited

Verifies whether given operator is valid for this one.

Parameters

theOtherOp - other operation

Returns: Returns TRUE if the given operator is valid for this one, FALSE otherwise

Virtual method redefined from base class verifies whether given operator is valid for this one (i.e. can be started "above" this operator). In current implementation method returns false if theOtherOp operation is not intended for deleting objects or mesh elements.

Reimplemented in SMESHGUI_BaseComputeOp, and SMESHGUI_MeshOp.

Referenced by SMESHGUI_MeshOp::isValid().

bool SMESHGUI_Make2DFrom3DOp::isValid ( QString & msg ) const

protected

References SMESHGUI_Operation::_PTR(), SMESHGUI::activeStudy(), SMESH::BND_1DFROM2D, SMESH::BND_2DFROM3D, dlg(), SMESH::FACE, SMESHGUI_Make2DFrom3DDlg::MeshOrGroups, myDlg, mySrcMesh, SObject(), and SMESH::VOLUME.

Referenced by onApply().

SMESH::SMESH_Mesh_var SMESHGUI_SelectionOp::mesh ( ) const

protectedinherited

Return selected mesh if selection mode isn't ActorSelection and only one object is selected.

References SMESH::GetMeshByIO(), and SMESHGUI_SelectionOp::selectionMode().

Referenced by SMESHGUI_SelectionOp::actor(), SMESHGUI_RevolutionDlg::ClickOnApply(), SMESHGUI_ConvToQuadOp::ConnectRadioButtons(), SMESHGUI_MeshOp::isSubshapeOk(), SMESHGUI_ConvToQuadOp::onApply(), SMESHGUI_GroupOnShapeOp::onApply(), SMESHGUI_SplitBiQuadOp::onApply(), SMESHGUI_Add0DElemsOnAllNodesOp::onApply(), SMESHGUI_RevolutionDlg::onDisplaySimulation(), SMESHGUI_Add0DElemsOnAllNodesOp::onSetFilter(), SMESHGUI_ConvToQuadOp::selectionDone(), SMESHGUI_MeshOp::selectionDone(), SMESHGUI_Add0DElemsOnAllNodesOp::selectionDone(), SMESHGUI_SelectionOp::typeById(), and SMESHGUI_Add0DElemsOnAllNodesOp::updateButtons().

void SMESHGUI_SelectionOp::onActivateObject ( int id )

protectedvirtualslotinherited

Installs filter corresponding to certain object selection widget.

References SMESHGUI_SelectionOp::createFilter(), SMESHGUI_SelectionOp::myFilters, and SMESHGUI_SelectionOp::selectionDone().

Referenced by SMESHGUI_MeshOp::checkSubMeshConcurrency(), SMESHGUI_GroupOnShapeOp::init(), SMESHGUI_ReorientFacesOp::onActivateObject(), SMESHGUI_GroupOnShapeOp::onButtonClick(), SMESHGUI_MeshOp::onHypoCreated(), SMESHGUI_MeshOp::onHypoEdited(), and SMESHGUI_SelectionOp::startOperation().

bool SMESHGUI_Make2DFrom3DOp::onApply ( )

protectedvirtualslot

References compute2DMesh(), dlg(), SMESHGUI_Operation::isApplyAndClose(), SMESHGUI_Operation::isStudyLocked(), isValid(), SMESHGUI::Modified(), myDlg, and SMESH::UniqueName().

void SMESHGUI_Operation::onCancel ( )

protectedvirtualslotinherited

Referenced by SMESHGUI_PrecomputeOp::onCancel(), SMESHGUI_Operation::startOperation(), and SMESHGUI_BaseComputeOp::startOperation().

void SMESHGUI_SelectionOp::onDeactivateObject ( int id )

protectedvirtualslotinherited

Removes filter corresponding to certain object selection widget.

References SMESHGUI_SelectionOp::removeCustomFilters().

Referenced by SMESHGUI_SelectionOp::startOperation().

void SMESHGUI_Operation::onHelp ( )

protectedslotinherited

References SMESHGUI_Operation::getSMESHGUI(), and SMESHGUI_Operation::myHelpFileName.

Referenced by SMESHGUI_Operation::startOperation(), and SMESHGUI_PrecomputeOp::startOperation().

void SMESHGUI_Make2DFrom3DOp::onModeChanged ( )

protectedslot

Set filter corresponding to dimension.

Referenced by startOperation().

void SMESHGUI_Operation::onOk ( )

protectedvirtualslotinherited

References SMESHGUI_Operation::onApply(), and SMESHGUI_Operation::setIsApplyAndClose().

Referenced by SMESHGUI_Operation::startOperation(), and SMESHGUI_PrecomputeOp::startOperation().

void SMESHGUI_SelectionOp::onSelectionChanged ( int )

protectedvirtualslotinherited

Empty default implementation.

In successors it may be used for more advanced selection checking. This slot is connected to signal when the selection changed in some object selection widget

Referenced by SMESHGUI_SelectionOp::startOperation().

void SMESHGUI_SelectionOp::onTextChanged	(	int	,
		const QStringList &	list
	)

protectedvirtualslotinherited

Default implementation allowing user to edit selected ids "by hands".

In order to run default mechanism, you must set for some object selection widget the "name indication" to "ListOfNames", "read only" state to false and connect the dialog's signal "objectChanged" to this slot Warning: this mechanism can process only integer ids, NOT MESH OR GROUP NAMES!!!

References SMESHGUI_SelectionOp::actor(), SMESHGUI_SelectionOp::extractIds(), SMDS_Mesh::FindElement(), SMDS_Mesh::FindNode(), SMESH_Actor::GetObject(), SMESHGUI_SelectionOp::highlight(), SMESHGUI_SelectionOp::selected(), SMESHGUI_SelectionOp::selectionMode(), and SMESHGUI_SelectionOp::selector().

Referenced by SMESHGUI_Add0DElemsOnAllNodesOp::onTextChanged().

void SMESHGUI_SelectionOp::removeCustomFilters ( )

protectedinherited

Remove only filters set by this operation (they are in map myFilters )

References SMESHGUI_SelectionOp::myFilters.

Referenced by SMESHGUI_SelectionOp::abortOperation(), SMESHGUI_SelectionOp::commitOperation(), SMESHGUI_MeshOp::createHypothesis(), SMESHGUI_GroupOnShapeOp::init(), SMESHGUI_GroupOnShapeOp::onApply(), SMESHGUI_GroupOnShapeOp::onButtonClick(), SMESHGUI_SelectionOp::onDeactivateObject(), SMESHGUI_MeshOp::onEditHyp(), and SMESHGUI_SelectionOp::~SMESHGUI_SelectionOp().