Interface for basic geometry creation. More...

import "GEOM_Gen.idl";

Inheritance diagram for GEOM::GEOM_IBasicOperations:

Public Member Functions
GEOM_Object	MakePointXYZ (in double theX, in double theY, in double theZ)
	Create point by three coordinates. More...

GEOM_Object	MakePointWithReference (in GEOM_Object theReference, in double theX, in double theY, in double theZ)
	Create a point, distant from the referenced point on the given distances along the coordinate axes. More...

GEOM_Object	MakePointOnCurve (in GEOM_Object theRefCurve, in double theParameter, in boolean takeOrientationIntoAccount)

GEOM_Object	MakePointOnCurveByLength (in GEOM_Object theRefCurve, in double theLength, in GEOM_Object theStartPoint)
	Create a point, corresponding to the given length on the given curve. More...

GEOM_Object	MakePointOnCurveByCoord (in GEOM_Object theRefCurve, in double theXParameter, in double theYParameter, in double theZParameter)
	Create a point on the given curve, projecting given point. More...

GEOM_Object	MakePointOnSurface (in GEOM_Object theRefSurf, in double theUParameter, in double theVParameter)
	Create a point, corresponding to the given parameters on the given surface. More...

GEOM_Object	MakePointOnSurfaceByCoord (in GEOM_Object theRefSurf, in double theXParameter, in double theYParameter, in double theZParameter)
	Create a point on the given surface, projecting given point. More...

GEOM_Object	MakePointOnFace (in GEOM_Object theFace)
	Create a point, which lays on the given face. The point will lay in arbitrary place of the face. The only condition on it is a non-zero distance to the face boundary. Such point can be used to uniquely identify the face inside any shape in case, when the shape does not contain overlapped faces. More...

GEOM_Object	MakePointOnLinesIntersection (in GEOM_Object theRefLine1, in GEOM_Object theRefLine2)
	Create a point, on two lines intersection. More...

GEOM_Object	MakeTangentOnCurve (in GEOM_Object theRefCurve, in double theParameter)
	Create a vector, corresponding to tangent to the given parameter on the given curve. More...

GEOM_Object	MakeVectorDXDYDZ (in double theDX, in double theDY, in double theDZ)
	Create a vector with the given components. More...

GEOM_Object	MakeVectorTwoPnt (in GEOM_Object thePnt1, in GEOM_Object thePnt2)
	Create a vector between two points. More...

GEOM_Object	MakeLine (in GEOM_Object thePnt, in GEOM_Object theDir)
	reate a line, passing through the given point and parrallel to the given direction More...

GEOM_Object	MakeLineTwoPnt (in GEOM_Object thePnt1, in GEOM_Object thePnt2)
	Create a line, passing through the given points. More...

GEOM_Object	MakeLineTwoFaces (in GEOM_Object theFace1, in GEOM_Object theFace2)
	Create a line, given by two faces intersection. More...

GEOM_Object	MakePlaneThreePnt (in GEOM_Object thePnt1, in GEOM_Object thePnt2, in GEOM_Object thePnt3, in double theTrimSize)
	Create a plane, passing through the three given points. More...

GEOM_Object	MakePlanePntVec (in GEOM_Object thePnt, in GEOM_Object theVec, in double theTrimSize)
	Create a plane, passing through the given point and normal to the given vector. More...

GEOM_Object	MakePlaneFace (in GEOM_Object theFace, in double theTrimSize)
	Create a plane, similar to the existing one, but with another size of representing face. More...

GEOM_Object	MakePlane2Vec (in GEOM_Object theVec1, in GEOM_Object theVec2, in double theTrimSize)
	Create a plane, by two vectors. More...

GEOM_Object	MakePlaneLCS (in GEOM_Object theLCS, in double theTrimSize, in double theOrientation)
	Create a plane, defined by local coordinate system. More...

GEOM_Object	MakeMarker (in double theOX, in double theOY, in double theOZ, in double theXDX, in double theXDY, in double theXDZ, in double theYDX, in double theYDY, in double theYDZ)
	Create a local coordinate system. More...

GEOM_Object	MakeMarkerFromShape (in GEOM_Object theShape)
	Create a local coordinate system from shape. More...

GEOM_Object	MakeMarkerPntTwoVec (in GEOM_Object theOrigin, in GEOM_Object theXVec, in GEOM_Object theYVec)
	Create a local coordinate system from point and two vectors (DX, DY). More...

GEOM_Object	MakeTangentPlaneOnFace (in GEOM_Object theFace, in double theParameterU, in double theParameterV, in double theTrimSize)
	Create a tangent plane to specified face in the point with specified parameters. More...

Public Member Functions inherited from GEOM::GEOM_IOperations
boolean	IsDone ()
	To know, if the operation was successfully performed. More...

void	SetErrorCode (in string theErrorID)
	Set the operation error code. More...

string	GetErrorCode ()
	Get the operation error code. More...

long	GetStudyID ()
	Get ID of study, where the operation is defined. More...

void	StartOperation ()
	Opens a new transaction. More...

void	FinishOperation ()
	Closes the previously opened trasaction. More...

void	AbortOperation ()
	Aborts the previously opened transaction. More...

Detailed Description

(Point, Vector, Plane, Marker)

Member Function Documentation

GEOM_Object GEOM::GEOM_IBasicOperations::MakeLine	(	in GEOM_Object	thePnt,
		in GEOM_Object	theDir
	)

C

Parameters

thePnt	Point. The resulting line will pass through it.
theDir	Direction. The resulting line will be parallel to it.

Returns: New GEOM_Object, containing the created line.

GEOM_Object GEOM::GEOM_IBasicOperations::MakeLineTwoFaces	(	in GEOM_Object	theFace1,
		in GEOM_Object	theFace2
	)

Parameters

theFace1	First of two faces, defining the line.
theFace2	Second of two faces, defining the line.

Returns: New GEOM_Object, containing the created line.

GEOM_Object GEOM::GEOM_IBasicOperations::MakeLineTwoPnt	(	in GEOM_Object	thePnt1,
		in GEOM_Object	thePnt2
	)

Parameters

thePnt1	First of two points, defining the line.
thePnt2	Second of two points, defining the line.

Returns: New GEOM_Object, containing the created line.

GEOM_Object GEOM::GEOM_IBasicOperations::MakeMarker	(	in double	theOX,
		in double	theOY,
		in double	theOZ,
		in double	theXDX,
		in double	theXDY,
		in double	theXDZ,
		in double	theYDX,
		in double	theYDY,
		in double	theYDZ
	)

Parameters

theOX,theOY,theOZ	Three coordinates of coordinate system origin.
theXDX,theXDY,theXDZ	Three components of OX direction
theYDX,theYDY,theYDZ	Three components of OY direction

Returns: New GEOM_Object, containing the created coordinate system.

GEOM_Object GEOM::GEOM_IBasicOperations::MakeMarkerFromShape ( in GEOM_Object theShape )

Parameters

theShape The initial shape to detect the coordinate system.

Returns: New GEOM_Object, containing the created coordinate system.

GEOM_Object GEOM::GEOM_IBasicOperations::MakeMarkerPntTwoVec	(	in GEOM_Object	theOrigin,
		in GEOM_Object	theXVec,
		in GEOM_Object	theYVec
	)

Parameters

theOrigin	Point of coordinate system origin.
theXVec	Vector of X direction.
theYVec	Vector of Y direction.

Returns: New GEOM_Object, containing the created coordinate system.

GEOM_Object GEOM::GEOM_IBasicOperations::MakePlane2Vec	(	in GEOM_Object	theVec1,
		in GEOM_Object	theVec2,
		in double	theTrimSize
	)

Parameters

theVec1	Vector1, the plane has to pass through first point of this vector.
theVec2	Vector2, defining the plane normal direction.
theTrimSize	Half size of a side of quadrangle face, representing the plane.

Returns: New GEOM_Object, containing the created plane.

GEOM_Object GEOM::GEOM_IBasicOperations::MakePlaneFace	(	in GEOM_Object	theFace,
		in double	theTrimSize
	)

Parameters

theFace	Referenced plane or LCS(Marker).
theTrimSize	New half size of a side of quadrangle face, representing the plane.

Returns: New GEOM_Object, containing the created plane.

GEOM_Object GEOM::GEOM_IBasicOperations::MakePlaneLCS	(	in GEOM_Object	theLCS,
		in double	theTrimSize,
		in double	theOrientation
	)

Parameters

theLCS	Referenced LCS(Marker).
theTrimSize	Half size of a side of quadrangle face, representing the plane.
theOrientation	OXY, OYZ or OZX orientation = (1, 2 or 3).

Returns: New GEOM_Object, containing the created plane.

GEOM_Object GEOM::GEOM_IBasicOperations::MakePlanePntVec	(	in GEOM_Object	thePnt,
		in GEOM_Object	theVec,
		in double	theTrimSize
	)

Parameters

thePnt	Point, the plane has to pass through.
theVec	Vector, defining the plane normal direction.
theTrimSize	Half size of a side of quadrangle face, representing the plane.

Returns: New GEOM_Object, containing the created plane.

GEOM_Object GEOM::GEOM_IBasicOperations::MakePlaneThreePnt	(	in GEOM_Object	thePnt1,
		in GEOM_Object	thePnt2,
		in GEOM_Object	thePnt3,
		in double	theTrimSize
	)

Parameters

thePnt1	First of three points, defining the plane.
thePnt2	Second of three points, defining the plane.
thePnt3	Fird of three points, defining the plane.
theTrimSize	Half size of a side of quadrangle face, representing the plane.

Returns: New GEOM_Object, containing the created plane.

GEOM_Object GEOM::GEOM_IBasicOperations::MakePointOnCurve	(	in GEOM_Object	theRefCurve,
		in double	theParameter,
		in boolean	takeOrientationIntoAccount
	)

Create a point, corresponding to the given parameter on the given curve.

Parameters

theRefCurve	The referenced curve.
theParameter	Value of parameter on the referenced curve.
takeOrientationIntoAccount	flag that tells if it is necessary to take the curve's orientation into account.

Returns: New GEOM_Object, containing the created point.

GEOM_Object GEOM::GEOM_IBasicOperations::MakePointOnCurveByCoord	(	in GEOM_Object	theRefCurve,
		in double	theXParameter,
		in double	theYParameter,
		in double	theZParameter
	)

Parameters

theRefCurve	The referenced curve.
theXParameter	X co-ordinate of point to project on curve
theYParameter	Y co-ordinate of point to project on curve
theZParameter	Z co-ordinate of point to project on curve

Returns: New GEOM_Object, containing the created point.

GEOM_Object GEOM::GEOM_IBasicOperations::MakePointOnCurveByLength	(	in GEOM_Object	theRefCurve,
		in double	theLength,
		in GEOM_Object	theStartPoint
	)

Parameters

theRefCurve	The referenced curve.
theLength	Length on the referenced curve. It can be negative.
theStartPoint	Any vertex close to one of edge's ends to select start point among them. If NULL, fist vertex is used.

Returns: New GEOM_Object, containing the created point.

GEOM_Object GEOM::GEOM_IBasicOperations::MakePointOnFace ( in GEOM_Object theFace )

Parameters

theFace The referenced face.

Returns: New GEOM_Object, containing the created point.

GEOM_Object GEOM::GEOM_IBasicOperations::MakePointOnLinesIntersection	(	in GEOM_Object	theRefLine1,
		in GEOM_Object	theRefLine2
	)

Parameters

theRefLine1,theRefLine2 The referenced lines.

Returns: New GEOM_Object, containing the created point.

GEOM_Object GEOM::GEOM_IBasicOperations::MakePointOnSurface	(	in GEOM_Object	theRefSurf,
		in double	theUParameter,
		in double	theVParameter
	)

Parameters

theRefSurf	The referenced surface.
theUParameter	Value of U-parameter on the referenced surface.
theVParameter	Value of V-parameter on the referenced surface.

Returns: New GEOM_Object, containing the created point.

GEOM_Object GEOM::GEOM_IBasicOperations::MakePointOnSurfaceByCoord	(	in GEOM_Object	theRefSurf,
		in double	theXParameter,
		in double	theYParameter,
		in double	theZParameter
	)

Parameters

theRefSurf	The referenced surface.
theXParameter	X co-ordinate of point to project on curve
theYParameter	Y co-ordinate of point to project on curve
theZParameter	Z co-ordinate of point to project on curve

Returns: New GEOM_Object, containing the created point.

GEOM_Object GEOM::GEOM_IBasicOperations::MakePointWithReference	(	in GEOM_Object	theReference,
		in double	theX,
		in double	theY,
		in double	theZ
	)

Parameters

theReference	The referenced point.
theX	Displacement from the referenced point along OX axis.
theY	Displacement from the referenced point along OY axis.
theZ	Displacement from the referenced point along OZ axis.

Returns: New GEOM_Object, containing the created point.

GEOM_Object GEOM::GEOM_IBasicOperations::MakePointXYZ	(	in double	theX,
		in double	theY,
		in double	theZ
	)

Parameters

theX	The X coordinate of the point.
theY	The Y coordinate of the point.
theZ	The Z coordinate of the point.

Returns: New GEOM_Object, containing the created point.

GEOM_Object GEOM::GEOM_IBasicOperations::MakeTangentOnCurve	(	in GEOM_Object	theRefCurve,
		in double	theParameter
	)

Parameters

theRefCurve	The referenced curve.
theParameter	Value of parameter on the referenced curve.This value should be have value between 0. and 1.. Value of 0. corresponds first parameter of curve; value corresponds last parameter of curve.

Returns: New GEOM_Object, containing the created point.

GEOM_Object GEOM::GEOM_IBasicOperations::MakeTangentPlaneOnFace	(	in GEOM_Object	theFace,
		in double	theParameterU,
		in double	theParameterV,
		in double	theTrimSize
	)

Values of parameters should be between 0. and 1.0

Parameters

theFace	- face for which tangent plane shuold be built.
theParameterU	- value of parameter by U
theParameterV	- value of parameter Vthe
theTrimSize	- defines sizes of created face

Returns: New GEOM_Object, containing the face built on tangent plane.

GEOM_Object GEOM::GEOM_IBasicOperations::MakeVectorDXDYDZ	(	in double	theDX,
		in double	theDY,
		in double	theDZ
	)

Parameters

theDX	X component of the vector.
theDY	Y component of the vector.
theDZ	Z component of the vector.

Returns: New GEOM_Object, containing the created vector.

GEOM_Object GEOM::GEOM_IBasicOperations::MakeVectorTwoPnt	(	in GEOM_Object	thePnt1,
		in GEOM_Object	thePnt2
	)

Parameters

thePnt1	Start point for the vector.
thePnt2	End point for the vector.

Returns: New GEOM_Object, containing the created vector.

The documentation for this interface was generated from the following file:

idl/GEOM_Gen.idl

Public Member Functions

Detailed Description

Member Function Documentation