Interface for 3D primitives creation. More...

import "GEOM_Gen.idl";

Public Member Functions
GEOM_Object	MakeBoxDXDYDZ (in double theDX, in double theDY, in double theDZ)
	Create a box with specified dimensions along the coordinate axes and with edges, parallel to the coordinate axes. More...

GEOM_Object	MakeBoxTwoPnt (in GEOM_Object thePnt1, in GEOM_Object thePnt2)
	Create a box with two specified opposite vertices, and with edges, parallel to the coordinate axes. More...

GEOM_Object	MakeFaceHW (in double theH, in double theW, in short theOrientation)
	Create a face specified dimensions along OX-OY coordinate axes, with edges parallel to the coordinate axes. More...

GEOM_Object	MakeFaceObjHW (in GEOM_Object theObj, in double theH, in double theW)
	Create a face by normale vector or edge and two specified sizes, vertical (H) and horisontal (W). More...

GEOM_Object	MakeDiskPntVecR (in GEOM_Object thePnt, in GEOM_Object theVec, in double theR)
	Create a Disk (circular face) with given center, normal vector and radius. More...

GEOM_Object	MakeDiskThreePnt (in GEOM_Object thePnt1, in GEOM_Object thePnt2, in GEOM_Object thePnt3)
	Create a disk (circular face), passing through three given points. More...

GEOM_Object	MakeDiskR (in double theR, in short theOrientation)
	Create a disk specified dimensions along OX-OY coordinate axes. More...

GEOM_Object	MakeCylinderRH (in double theR, in double theH)
	Create a cylinder with given radius and height at the origin of coordinate system. More...

GEOM_Object	MakeCylinderRHA (in double theR, in double theH, in double theA)
	Create a portion of cylinder with given radius, height and angle at the origin of coordinate system. More...

GEOM_Object	MakeCylinderPntVecRH (in GEOM_Object thePnt, in GEOM_Object theAxis, in double theR, in double theH)
	Create a cylinder with given base point, axis, radius and height. More...

GEOM_Object	MakeCylinderPntVecRHA (in GEOM_Object thePnt, in GEOM_Object theAxis, in double theR, in double theH, in double theA)
	Create a portion of cylinder with given base point, axis, radius, height and angle. More...

GEOM_Object	MakeConeR1R2H (in double theR1, in double theR2, in double theH)
	Create a cone with given height and radiuses at the origin of coordinate system. More...

GEOM_Object	MakeConePntVecR1R2H (in GEOM_Object thePnt, in GEOM_Object theAxis, in double theR1, in double theR2, in double theH)
	Create a cone with given base point, axis, height and radiuses. More...

GEOM_Object	MakeTorusRR (in double theRMajor, in double theRMinor)
	Create a torus with given radiuses at the origin of coordinate system. More...

GEOM_Object	MakeTorusPntVecRR (in GEOM_Object thePnt, in GEOM_Object theVec, in double theRMajor, in double theRMinor)
	Create a torus with given center, normal vector and radiuses. More...

GEOM_Object	MakeSphereR (in double theR)
	Create a sphere with given radius at the origin of coordinate system. More...

GEOM_Object	MakeSpherePntR (in GEOM_Object thePnt, in double theR)
	Create a sphere with given center and radius. More...

GEOM_Object	MakePrismVecH (in GEOM_Object theBase, in GEOM_Object theVec, in double theH)
	Create a shape by extrusion of the base shape along the vector. More...

GEOM_Object	MakePrismVecH2Ways (in GEOM_Object theBase, in GEOM_Object theVec, in double theH)

GEOM_Object	MakePrismVecHWithScaling (in GEOM_Object theBase, in GEOM_Object theVec, in double theH, in double theScaleFactor)

GEOM_Object	MakePrismTwoPnt (in GEOM_Object theBase, in GEOM_Object thePoint1, in GEOM_Object thePoint2)
	Create a shape by extrusion of the base shape along a vector, defined by two points. More...

GEOM_Object	MakePrismTwoPnt2Ways (in GEOM_Object theBase, in GEOM_Object thePoint1, in GEOM_Object thePoint2)

GEOM_Object	MakePrismTwoPntWithScaling (in GEOM_Object theBase, in GEOM_Object thePoint1, in GEOM_Object thePoint2, in double theScaleFactor)

GEOM_Object	MakePrismDXDYDZ (in GEOM_Object theBase, in double theDX, in double theDY, in double theDZ)
	Create a shape by extrusion of the base shape along a vector, defined by DX DY DZ. More...

GEOM_Object	MakePrismDXDYDZ2Ways (in GEOM_Object theBase, in double theDX, in double theDY, in double theDZ)

GEOM_Object	MakePrismDXDYDZWithScaling (in GEOM_Object theBase, in double theDX, in double theDY, in double theDZ, in double theScaleFactor)

GEOM_Object	MakeDraftPrism (in GEOM_Object theInitShape, in GEOM_Object theBase, in double theHeight, in double theAngle, in boolean theFuse, in boolean theInvert)
	Add / Remove material to / from a solid by extrusion of the base shape on the given distance. More...

ListOfGO	MakePipe (in GEOM_Object theBase, in GEOM_Object thePath, in boolean IsGenerateGroups)
	Create a shape by extrusion of the base shape along the path shape. The path shape can be a wire or an edge. More...

GEOM_Object	MakeRevolutionAxisAngle (in GEOM_Object theBase, in GEOM_Object theAxis, in double theAngle)
	Create a shape by revolution of the base shape around the axis on the given angle. More...

GEOM_Object	MakeRevolutionAxisAngle2Ways (in GEOM_Object theBase, in GEOM_Object theAxis, in double theAngle)

GEOM_Object	MakeFilling (in ListOfGO theContours, in long theMinDeg, in long theMaxDeg, in double theTol2D, in double theTol3D, in long theNbIter, in filling_oper_method theMethod, in boolean theApprox)
	Create a face from a given set of contours. More...

GEOM_Object	MakeThruSections (in ListOfGO theSeqSections, in boolean theModeSolid, in double thePreci, in boolean theRuled)
	Create a shell or solid passing through set of sections.Sections should be wires,edges or vertices. More...

ListOfGO	MakePipeWithDifferentSections (in ListOfGO theSeqBases, in ListOfGO theLocations, in GEOM_Object thePath, in boolean theWithContact, in boolean theWithCorrection, in boolean IsBySteps, in boolean IsGenerateGroups)
	Create a shape by extrusion of the profile shape along the path shape. More...

ListOfGO	MakePipeWithShellSections (in ListOfGO theSeqBases, in ListOfGO theSeqSubBases, in ListOfGO theLocations, in GEOM_Object thePath, in boolean theWithContact, in boolean theWithCorrection, in boolean IsGenerateGroups)
	Create a shape by extrusion of the profile shape along the path shape. More...

ListOfGO	MakePipeShellsWithoutPath (in ListOfGO theSeqBases, in ListOfGO theLocations, in boolean IsGenerateGroups)
	Create solids between given sections. More...

ListOfGO	MakePipeBiNormalAlongVector (in GEOM_Object theBase, in GEOM_Object thePath, in GEOM_Object theVec, in boolean IsGenerateGroups)
	Create a shape by extrusion of the base shape along the path shape with constant bi-normal direction along the given vector. More...

GEOM_Object	MakeThickening (in GEOM_Object theObject, in ListOfLong theFacesIDs, in double theThickness, in boolean isCopy, in boolean isInside)
	Make a thick solid from a shape. More...

GEOM_Object	RestorePath (in GEOM_Object theShape, in GEOM_Object theBase1, in GEOM_Object theBase2)
	Build a middle path of a pipe-like shape. More...

GEOM_Object	RestorePathEdges (in GEOM_Object theShape, in ListOfGO theBase1, in ListOfGO theBase2)
	Build a middle path of a pipe-like shape. More...

boolean	IsDone ()
	To know, if the operation was successfully performed. More...

void	SetErrorCode (in string theErrorID)
	Set the operation error code. More...

string	GetErrorCode ()
	Get the operation error code. More...

long	GetStudyID ()
	Get ID of study, where the operation is defined. More...

void	StartOperation ()
	Opens a new transaction. More...

void	FinishOperation ()
	Closes the previously opened trasaction. More...

void	AbortOperation ()
	Aborts the previously opened transaction. More...

Detailed Description

Interface for 3D primitives creation.

Box, Cylinder, Cone, Sphere, Prism (extrusion), Pipe (extrusion along contour), Revolution, Solid (from shell).

Member Function Documentation

GEOM_Object MakeBoxDXDYDZ	(	in double	theDX,
		in double	theDY,
		in double	theDZ
	)

Create a box with specified dimensions along the coordinate axes and with edges, parallel to the coordinate axes.

Center of the box will be at point (DX/2, DY/2, DZ/2).

Parameters

theDX	Length of Box edges, parallel to OX axis.
theDY	Length of Box edges, parallel to OY axis.
theDZ	Length of Box edges, parallel to OZ axis.

Returns: New GEOM_Object, containing the created box.

GEOM_Object MakeBoxTwoPnt	(	in GEOM_Object	thePnt1,
		in GEOM_Object	thePnt2
	)

Create a box with two specified opposite vertices, and with edges, parallel to the coordinate axes.

Parameters

thePnt1	First of two opposite vertices.
thePnt2	Second of two opposite vertices.

Returns: New GEOM_Object, containing the created box.

GEOM_Object MakeFaceHW	(	in double	theH,
		in double	theW,
		in short	theOrientation
	)

Create a face specified dimensions along OX-OY coordinate axes, with edges parallel to the coordinate axes.

Center of the face will be at point (0, 0, 0).

Parameters

theH	Height of the Face.
theW	Width of the Face.
theOrientation	Orientation belong axis OXY OYZ OZX

Returns: New GEOM_Object, containing the created face.

GEOM_Object MakeFaceObjHW	(	in GEOM_Object	theObj,
		in double	theH,
		in double	theW
	)

Create a face by normale vector or edge and two specified sizes, vertical (H) and horisontal (W).

Parameters

theObj	defines plane.
theH	vertical size (height).
theW	horisontal size (width).

Returns: New GEOM_Object, containing the created face.

GEOM_Object MakeDiskPntVecR	(	in GEOM_Object	thePnt,
		in GEOM_Object	theVec,
		in double	theR
	)

Create a Disk (circular face) with given center, normal vector and radius.

Parameters

thePnt	disk center.
theVec	Vector, normal to the plane of the disk.
theR	Disk radius.

Returns: New GEOM_Object, containing the created disk.

GEOM_Object MakeDiskThreePnt	(	in GEOM_Object	thePnt1,
		in GEOM_Object	thePnt2,
		in GEOM_Object	thePnt3
	)

Create a disk (circular face), passing through three given points.

Parameters

thePnt1,thePnt2,thePnt3 Points, defining the disk.

Returns: New GEOM_Object, containing the created disk.

GEOM_Object MakeDiskR	(	in double	theR,
		in short	theOrientation
	)

Create a disk specified dimensions along OX-OY coordinate axes.

Center of the disk at point (0, 0, 0).

Parameters

theR	of the Disk.
theOrientation	Orientation belong axis OXY OYZ OZX

Returns: New GEOM_Object, containing the created disk.

GEOM_Object MakeCylinderRH	(	in double	theR,
		in double	theH
	)

Create a cylinder with given radius and height at the origin of coordinate system.

Axis of the cylinder will be collinear to the OZ axis of the coordinate system.

Parameters

theR	Cylinder radius.
theH	Cylinder height.

Returns: New GEOM_Object, containing the created cylinder.

GEOM_Object MakeCylinderRHA	(	in double	theR,
		in double	theH,
		in double	theA
	)

Create a portion of cylinder with given radius, height and angle at the origin of coordinate system.

Axis of the cylinder will be collinear to the OZ axis of the coordinate system.

Parameters

theR	Cylinder radius.
theH	Cylinder height.
theA	Cylinder angle.

Returns: New GEOM_Object, containing the created cylinder.

GEOM_Object MakeCylinderPntVecRH	(	in GEOM_Object	thePnt,
		in GEOM_Object	theAxis,
		in double	theR,
		in double	theH
	)

Create a cylinder with given base point, axis, radius and height.

Parameters

thePnt	Central point of cylinder base.
theAxis	Cylinder axis.
theR	Cylinder radius.
theH	Cylinder height.

Returns: New GEOM_Object, containing the created cylinder.

GEOM_Object MakeCylinderPntVecRHA	(	in GEOM_Object	thePnt,
		in GEOM_Object	theAxis,
		in double	theR,
		in double	theH,
		in double	theA
	)

Create a portion of cylinder with given base point, axis, radius, height and angle.

Parameters

thePnt	Central point of cylinder base.
theAxis	Cylinder axis.
theR	Cylinder radius.
theH	Cylinder height.
theA	Cylinder angle.

Returns: New GEOM_Object, containing the created cylinder.

GEOM_Object MakeConeR1R2H	(	in double	theR1,
		in double	theR2,
		in double	theH
	)

Create a cone with given height and radiuses at the origin of coordinate system.

Axis of the cone will be collinear to the OZ axis of the coordinate system.

Parameters

theR1	Radius of the first cone base.
theR2	Radius of the second cone base.

Note: If both radiuses are non-zero, the cone will be truncated.; If the radiuses are equal, a cylinder will be created instead.

Parameters

theH	Cone height.

Returns: New GEOM_Object, containing the created cone.

GEOM_Object MakeConePntVecR1R2H	(	in GEOM_Object	thePnt,
		in GEOM_Object	theAxis,
		in double	theR1,
		in double	theR2,
		in double	theH
	)

Create a cone with given base point, axis, height and radiuses.

Parameters

thePnt	Central point of the first cone base.
theAxis	Cone axis.
theR1	Radius of the first cone base.
theR2	Radius of the second cone base.

Note: If both radiuses are non-zero, the cone will be truncated.; If the radiuses are equal, a cylinder will be created instead.

Parameters

theH	Cone height.

Returns: New GEOM_Object, containing the created cone.

GEOM_Object MakeTorusRR	(	in double	theRMajor,
		in double	theRMinor
	)

Create a torus with given radiuses at the origin of coordinate system.

Parameters

theRMajor	Torus major radius.
theRMinor	Torus minor radius.

Returns: New GEOM_Object, containing the created torus.

GEOM_Object MakeTorusPntVecRR	(	in GEOM_Object	thePnt,
		in GEOM_Object	theVec,
		in double	theRMajor,
		in double	theRMinor
	)

Create a torus with given center, normal vector and radiuses.

Parameters

thePnt	Torus central point.
theVec	Torus axis of symmetry.
theRMajor	Torus major radius.
theRMinor	Torus minor radius.

Returns: New GEOM_Object, containing the created torus.

GEOM_Object MakeSphereR ( in double theR )

Create a sphere with given radius at the origin of coordinate system.

Parameters

theR	Sphere radius.

Returns: New GEOM_Object, containing the created sphere.

GEOM_Object MakeSpherePntR	(	in GEOM_Object	thePnt,
		in double	theR
	)

Create a sphere with given center and radius.

Parameters

thePnt	Sphere center.
theR	Sphere radius.

Returns: New GEOM_Object, containing the created .

GEOM_Object MakePrismVecH	(	in GEOM_Object	theBase,
		in GEOM_Object	theVec,
		in double	theH
	)

Create a shape by extrusion of the base shape along the vector.

All the space, transfixed by the base shape during its translation along the vector on the given distance.

Parameters

theBase	Base shape to be extruded.
theVec	Direction of extrusion.
theH	Prism dimension along theVec.

Returns: New GEOM_Object, containing the created prism.

GEOM_Object MakePrismVecH2Ways	(	in GEOM_Object	theBase,
		in GEOM_Object	theVec,
		in double	theH
	)

GEOM_Object MakePrismVecHWithScaling	(	in GEOM_Object	theBase,
		in GEOM_Object	theVec,
		in double	theH,
		in double	theScaleFactor
	)

GEOM_Object MakePrismTwoPnt	(	in GEOM_Object	theBase,
		in GEOM_Object	thePoint1,
		in GEOM_Object	thePoint2
	)

Create a shape by extrusion of the base shape along a vector, defined by two points.

Parameters

theBase	Base shape to be extruded.
thePoint1	First end of extrusion vector.
thePoint2	Second end of extrusion vector.

Returns: New GEOM_Object, containing the created prism.

GEOM_Object MakePrismTwoPnt2Ways	(	in GEOM_Object	theBase,
		in GEOM_Object	thePoint1,
		in GEOM_Object	thePoint2
	)

GEOM_Object MakePrismTwoPntWithScaling	(	in GEOM_Object	theBase,
		in GEOM_Object	thePoint1,
		in GEOM_Object	thePoint2,
		in double	theScaleFactor
	)

GEOM_Object MakePrismDXDYDZ	(	in GEOM_Object	theBase,
		in double	theDX,
		in double	theDY,
		in double	theDZ
	)

Create a shape by extrusion of the base shape along a vector, defined by DX DY DZ.

Parameters

theBase	Base shape to be extruded.
theDX,theDY,theDZ	end of extrusion vector.

Returns: New GEOM_Object, containing the created prism.

GEOM_Object MakePrismDXDYDZ2Ways	(	in GEOM_Object	theBase,
		in double	theDX,
		in double	theDY,
		in double	theDZ
	)

GEOM_Object MakePrismDXDYDZWithScaling	(	in GEOM_Object	theBase,
		in double	theDX,
		in double	theDY,
		in double	theDZ,
		in double	theScaleFactor
	)

GEOM_Object MakeDraftPrism	(	in GEOM_Object	theInitShape,
		in GEOM_Object	theBase,
		in double	theHeight,
		in double	theAngle,
		in boolean	theFuse,
		in boolean	theInvert
	)

Add / Remove material to / from a solid by extrusion of the base shape on the given distance.

Parameters

theInitShape	Initial shape on which to perform the feature.It has to be a solid or a compound made of a single solid
theBase	Edge or wire defining the base shape to be extruded.
theHeight	Prism dimension along the normal of the face.
theAngle	Draft angel in degrees
theFuse	If true material is added else material is removed
theInvert	If true material changes the direction

Returns: New GEOM_Object, containing the modified shape

ListOfGO MakePipe	(	in GEOM_Object	theBase,
		in GEOM_Object	thePath,
		in boolean	IsGenerateGroups
	)

Create a shape by extrusion of the base shape along the path shape. The path shape can be a wire or an edge.

Parameters

theBase	Base shape to be extruded.
thePath	Path shape to extrude the base shape along it.
IsGenerateGroups	flag that tells if it is necessary to return groups (true) or not (false).

Returns: The list of objects. The first one is a result pipe, the other ones are the created groups. If IsGenerateGroups is not set the returned list contains a single object, which is the operation result.

GEOM_Object MakeRevolutionAxisAngle	(	in GEOM_Object	theBase,
		in GEOM_Object	theAxis,
		in double	theAngle
	)

Create a shape by revolution of the base shape around the axis on the given angle.

All the space, transfixed by the base shape during its rotation around the axis on the given angle.

Parameters

theBase	Base shape to be rotated.
theAxis	Rotation axis.
theAngle	Rotation angle in radians.

Returns: New GEOM_Object, containing the created revolution.

GEOM_Object MakeRevolutionAxisAngle2Ways	(	in GEOM_Object	theBase,
		in GEOM_Object	theAxis,
		in double	theAngle
	)

GEOM_Object MakeFilling	(	in ListOfGO	theContours,
		in long	theMinDeg,
		in long	theMaxDeg,
		in double	theTol2D,
		in double	theTol3D,
		in long	theNbIter,
		in filling_oper_method	theMethod,
		in boolean	theApprox
	)

Create a face from a given set of contours.

Parameters

theContours	either a list or a compound of edges/wires.
theMinDeg	a minimal degree of BSpline surface to create.
theMaxDeg	a maximal degree of BSpline surface to create.
theTol2D	a 2d tolerance to be reached.
theTol3D	a 3d tolerance to be reached.
theNbIter	a number of iteration of approximation algorithm.
theMethod	Kind of method to perform filling operation.
theApprox	Boolean indicating if result should be approximated.

Returns: New GEOM_Object (face), containing the created filling surface.

GEOM_Object MakeThruSections	(	in ListOfGO	theSeqSections,
		in boolean	theModeSolid,
		in double	thePreci,
		in boolean	theRuled
	)

Create a shell or solid passing through set of sections.Sections should be wires,edges or vertices.

Parameters

theSeqSections	- set of specified sections.
theModeSolid	- mode defining building solid or shell
thePreci	- precision 3D used for smoothing by default 1.e-6
theRuled	- mode defining type of the result surfaces (ruled or smoothed).

Returns: New GEOM_Object, containing the created shell or solid.

ListOfGO MakePipeWithDifferentSections	(	in ListOfGO	theSeqBases,
		in ListOfGO	theLocations,
		in GEOM_Object	thePath,
		in boolean	theWithContact,
		in boolean	theWithCorrection,
		in boolean	IsBySteps,
		in boolean	IsGenerateGroups
	)

Create a shape by extrusion of the profile shape along the path shape.

The path shape can be a wire or an edge. the several profiles can be specified in the several locations of path.

Parameters

theSeqBases	- list of Bases shape to be extruded.
theLocations	- list of locations on the path corresponding specified list of the Bases shapes. Number of locations should be equal to number of bases or list of locations can be empty.
thePath	- Path shape to extrude the base shape along it.
theWithContact	- the mode defining that the section is translated to be in contact with the spine. Ignored if IsBySteps is set.
theWithCorrection	- defining that the section is rotated to be orthogonal to the spine tangent in the correspondent point. Ignored if IsBySteps is set.
IsBySteps	- flag that tells if the result should be created step by step or as a whole. If IsBySteps is set no correction of bases is allowed.
IsGenerateGroups	flag that tells if it is necessary to return groups (true) or not (false).

Returns: The list of objects. The first one is a result pipe, the other ones are the created groups. If IsGenerateGroups is not set the returned list contains a single object, which is the operation result.

ListOfGO MakePipeWithShellSections	(	in ListOfGO	theSeqBases,
		in ListOfGO	theSeqSubBases,
		in ListOfGO	theLocations,
		in GEOM_Object	thePath,
		in boolean	theWithContact,
		in boolean	theWithCorrection,
		in boolean	IsGenerateGroups
	)

Create a shape by extrusion of the profile shape along the path shape.

The path shape can be a shell or a face. the several profiles can be specified in the several locations of path.

Parameters

theSeqBases	- list of Bases shape to be extruded.
theSeqSubBases	- list of corresponding sub-shapes of section shapes.
theLocations	- list of locations on the path corresponding specified list of the Bases shapes. Number of locations should be equal to number of bases.
thePath	- Path shape to extrude the base shape along it.
theWithContact	- the mode defining that the section is translated to be in contact with the spine.
theWithCorrection	- defining that the section is rotated to be orthogonal to the spine tangent in the correspondent point
IsGenerateGroups	flag that tells if it is necessary to return groups (true) or not (false).

Returns: The list of objects. The first one is a result pipe, the other ones are the created groups. If IsGenerateGroups is not set the returned list contains a single object, which is the operation result.

ListOfGO MakePipeShellsWithoutPath	(	in ListOfGO	theSeqBases,
		in ListOfGO	theLocations,
		in boolean	IsGenerateGroups
	)

Create solids between given sections.

Parameters

theSeqBases	- list of sections (shell or face).
theLocations	- list of corresponding vertexes
IsGenerateGroups	flag that tells if it is necessary to return groups (true) or not (false).

Returns: The list of objects. The first one is a result pipe, the other ones are the created groups. If IsGenerateGroups is not set the returned list contains a single object, which is the operation result.

ListOfGO MakePipeBiNormalAlongVector	(	in GEOM_Object	theBase,
		in GEOM_Object	thePath,
		in GEOM_Object	theVec,
		in boolean	IsGenerateGroups
	)

Create a shape by extrusion of the base shape along the path shape with constant bi-normal direction along the given vector.

The path shape can be a wire or an edge.

Parameters

theBase	Base shape to be extruded.
thePath	Path shape to extrude the base shape along it.
theVec	Vector defines a constant binormal direction to keep the same angle beetween the Direction and the sections along the sweep surface.
IsGenerateGroups	flag that tells if it is necessary to return groups (true) or not (false).

Returns: The list of objects. The first one is a result pipe, the other ones are the created groups. If IsGenerateGroups is not set the returned list contains a single object, which is the operation result.

GEOM_Object MakeThickening	(	in GEOM_Object	theObject,
		in ListOfLong	theFacesIDs,
		in double	theThickness,
		in boolean	isCopy,
		in boolean	isInside
	)

Make a thick solid from a shape.

If the input is a surface shape (face or shell) the result is a thick solid. If an input shape is a solid the result is a hollowed solid with removed faces.

Parameters

theObject	face or shell to get thick solid or solid to get hollowed solid.
theFacesIDs	the list of face IDs to be removed from the result. It can be empty.
theThickness	Value of the thickness
isCopy	To make a copy of theObject or to modify theObject
isInside	If true the thickness is applied towards inside

Returns: New GEOM_Object, containing the created pipe if isCopy = true or the modified object if isCopy = false

GEOM_Object RestorePath	(	in GEOM_Object	theShape,
		in GEOM_Object	theBase1,
		in GEOM_Object	theBase2
	)

Build a middle path of a pipe-like shape.

The path shape can be a wire or an edge.

Parameters

theShape	It can be closed or unclosed pipe-like shell or a pipe-like solid.
theBase1,theBase2	Two bases of the supposed pipe. This should be wires or faces of theShape.

Note: It is not assumed that exact or approximate copy of theShape can be obtained by applying existing Pipe operation on the resulting "Path" wire taking theBase1 as the base - it is not always possible; though in some particular cases it might work it is not guaranteed. Thus, RestorePath function should not be considered as an exact reverse operation of the Pipe.

Returns: New GEOM_Object, containing an edge or wire that represent source pipe's "path".

GEOM_Object RestorePathEdges	(	in GEOM_Object	theShape,
		in ListOfGO	theBase1,
		in ListOfGO	theBase2
	)

Build a middle path of a pipe-like shape.

The path shape can be a wire or an edge.

Parameters

theShape	It can be closed or unclosed pipe-like shell or a pipe-like solid.
theBase1,theBase2	Two bases of the supposed pipe. This should be lists of edges of theShape.

Note: It is not assumed that exact or approximate copy of theShape can be obtained by applying existing Pipe operation on the resulting "Path" wire taking theBase1 as the base - it is not always possible; though in some particular cases it might work it is not guaranteed. Thus, RestorePath function should not be considered as an exact reverse operation of the Pipe.

Returns: New GEOM_Object, containing an edge or wire that represent source pipe's "path".

boolean IsDone ( )

inherited

To know, if the operation was successfully performed.

void SetErrorCode ( in string theErrorID )

inherited

Set the operation error code.

Parameters

theErrorID is a string describing the error occured

Note: This method is supposed to be used only by interfaces inheriting from IOperations.

string GetErrorCode ( )

inherited

Get the operation error code.

long GetStudyID ( )

inherited

Get ID of study, where the operation is defined.

void StartOperation ( )

inherited

Opens a new transaction.

void FinishOperation ( )

inherited

Closes the previously opened trasaction.

void AbortOperation ( )

inherited

Aborts the previously opened transaction.

Public Member Functions

Detailed Description

Member Function Documentation