import MEDLoader as ml
# Mesh creation
targetCoords = [-0.3,-0.3, 0.2,-0.3, 0.7,-0.3, -0.3,0.2, 0.2,0.2, 0.7,0.2, -0.3,0.7, 0.2,0.7, 0.7,0.7 ]
targetConn = [0,3,4,1, 1,4,2, 4,5,2, 6,7,4,3, 7,8,5,4]
targetMesh = ml.MEDCouplingUMesh("MyMesh",2)
targetMesh.allocateCells(5)
targetMesh.insertNextCell(ml.NORM_TRI3,3,targetConn[4:7])
targetMesh.insertNextCell(ml.NORM_TRI3,3,targetConn[7:10])
targetMesh.insertNextCell(ml.NORM_QUAD4,4,targetConn[0:4])
targetMesh.insertNextCell(ml.NORM_QUAD4,4,targetConn[10:14])
targetMesh.insertNextCell(ml.NORM_QUAD4,4,targetConn[14:18])
myCoords = ml.DataArrayDouble(targetCoords,9,2)
myCoords.setInfoOnComponents(["X [km]","YY [mm]"])
targetMesh.setCoords(myCoords)
# Build the 2D faces from the 3D volumes (descending connectivity)
targetMeshConsti, _, _, _, _ = targetMesh.buildDescendingConnectivity()
targetMesh1 = targetMeshConsti[[3,4,7,8]]
targetMesh1.setName(targetMesh.getName())
#
# Meshes
#
meshMEDFile = ml.MEDFileUMesh()
meshMEDFile.setMeshAtLevel(0,targetMesh)
meshMEDFile.setMeshAtLevel(-1,targetMesh1)
# Some groups on cells Level 0
grp0_0 = ml.DataArrayInt([0,1,3])
grp0_0.setName("grp0_Lev0")
grp1_0 = ml.DataArrayInt([1,2,3,4])
grp1_0.setName("grp1_Lev0")
meshMEDFile.setGroupsAtLevel(0, [grp0_0,grp1_0])
# Some groups on cells Level -1
grp0_M1 = ml.DataArrayInt([0,1])
grp0_M1.setName("grp0_LevM1")
grp1_M1 = ml.DataArrayInt([0,1,2])
grp1_M1.setName("grp1_LevM1")
grp2_M1 = ml.DataArrayInt([1,2,3])
grp2_M1.setName("grp2_LevM1")
meshMEDFile.setGroupsAtLevel(-1,[grp0_M1,grp1_M1,grp2_M1])
# Write everything
meshMEDFile.write("TargetMesh2.med",2) # 2 stands for write from scratch
# Re-read and test equality
meshMEDFileRead = ml.MEDFileMesh.New("TargetMesh2.med") # a new is needed because it returns a MEDFileUMesh (MEDFileMesh is abstract)
meshRead0 = meshMEDFileRead.getMeshAtLevel(0)
meshRead1 = meshMEDFileRead.getMeshAtLevel(-1)
print "Is level 0 in the file equal to 'targetMesh'?", meshRead0.isEqual(targetMesh,1e-12)
print "Is level 0 in the file equal to 'targetMesh1'?", meshRead1.isEqual(targetMesh1,1e-12)
# Read groups
print meshMEDFileRead.getGrpNonEmptyLevels("grp0_Lev0")
grp0_0_read = meshMEDFileRead.getGroupArr(0,"grp0_Lev0")
print "Is group 'grp0_Lev0' equal to what is read in the file?" , grp0_0_read.isEqual(grp0_0)
#
# Fields
#
f = ml.MEDCouplingFieldDouble(ml.ON_CELLS, ml.ONE_TIME)
f.setTime(5.6,7,8)
f.setArray(targetMesh.computeCellCenterOfMass())
f.setMesh(targetMesh)
f.setName("AFieldName")
# Prepare field for writing
fMEDFile = ml.MEDFileField1TS()
fMEDFile.setFieldNoProfileSBT(f) # No profile desired on the field, Sort By Type
# *Append* the field to an existing file
fMEDFile.write("TargetMesh2.med",0) # 0 is very important here because we want to append to TargetMesh2.med and not to scratch it
# Read the field
fMEDFileRead = ml.MEDFileField1TS("TargetMesh2.med",f.getName(),7,8)
fRead1 = fMEDFileRead.getFieldOnMeshAtLevel(ml.ON_CELLS,0,meshMEDFileRead) # Quickest way, not re-reading mesh in the file.
fRead2 = fMEDFileRead.getFieldAtLevel(ml.ON_CELLS,0) # Like above, but this time the mesh is read!
print "Does the field remain OK with the quick method?", fRead1.isEqual(f,1e-12,1e-12)
print "Does the field remain OK with the slow method?", fRead2.isEqual(f,1e-12,1e-12)
#
# Writing and Reading fields on profile using MEDLoader advanced API
#
pfl = ml.DataArrayInt([1,2,3])
pfl.setName("My1stPfl")
fPart = f.buildSubPart(pfl)
fPart.setName("fPart")
#
fMEDFile2 = ml.MEDFileField1TS()
fMEDFile2.setFieldProfile(fPart,meshMEDFileRead,0,pfl) # 0 is the relative level (here 0 means 3D)
fMEDFile2.write("TargetMesh2.med",0) # 0 is paramount to indicate that we *append* (and no overwrite) to the MED file
#
fMEDFileRead2 = ml.MEDFileField1TS("TargetMesh2.med",fPart.getName(),7,8)
fPartRead, pflRead = fMEDFileRead2.getFieldWithProfile(ml.ON_CELLS,0,meshMEDFileRead)
print "Is the partial field correclty read?", fPartRead.isEqualWithoutConsideringStr(fPart.getArray(),1e-12)
print "Is the list of cell identifiers matching?", pflRead.isEqualWithoutConsideringStr(pfl)